Skip to content
EffiZoom

AgencyZoom how-to and templates

What can AgencyZoom automation do, and how do you set it up yourself?

AgencyZoom automation sends emails and texts, creates tasks and fires reminders per pipeline stage. What it covers, and the menu path to build it yourself.

Co-Founder, EffiZoom; licensed insurance agent

· Updated · 6 min read

AgencyZoom automation does four things. For each stage of a pipeline it can send an email, send a text, create a task for a person (a to-do, a call or an email) and fire a reminder. You build it under the Lifecycle Automation tab, one pipeline and one stage at a time, as a timeline of those touchpoints. That is the whole feature. Everything an agency calls “our follow-up system” is some arrangement of those four moves across the stages a lead or customer passes through.

If you have never opened that tab, this is the map.

What AgencyZoom automation actually covers

AgencyZoom’s own documentation lists the touchpoint types you can add to a stage: automated steps (Send an Email, Send a Text Message), tasks (ToDo, Call, Email) and notifications (Reminder). Source: Build Automation for Sales Pipelines.

Two things that list tells you.

First, automation is tied to stages, not to people. A lead sitting in Contacted gets the Contacted timeline. Move the card to Quoted and the Quoted timeline takes over. The stage is the trigger. So the quality of your automation is capped by the quality of your stages. If Contacted means three different things to three producers, the automation behind it will feel random to the customer. Fix the stage definitions before you write a single message.

Second, half of the touchpoint types are not messages at all. Tasks and reminders put work on a human’s list. A stage that fires one text to the lead and one call task to the producer on day two is automation. The industry habit of treating automation as “drip emails” leaves the better half of the feature unused.

What it does not do: it does not decide which stage a lead belongs in, it does not read replies and change course, and it does not know what you meant to say. It runs the timeline you gave it, on the stage the card is in. AI will expedite anything you apply to it. If you apply chaos to it, it expedites chaos. Same rule here.

How do you set it up yourself?

You need the Admin permission level in AgencyZoom to build automation; the help center is explicit on that point. Then the path is short.

  1. Pick one pipeline and write down its stages

    Before you touch the software, write the stages on paper and, next to each one, the single thing that should happen when a card lands there. One line per stage. If you cannot write the line, you are not ready to automate that stage yet, and that is useful to know. AI cannot automate what you cannot explain, and neither can a timeline of touchpoints.

  2. Open Lifecycle Automation and select the stage

    In AgencyZoom, go to the Lifecycle Automation tab. The left panel lists your pipelines under Prospecting, with the stages under each. Standard and custom pipelines both show up there. Click the stage you wrote the line for.

  3. Add the touchpoints in order

    Click Add Automated Step in the top right (or use its dropdown) and choose the touchpoint: email, text, a task or a reminder. Add the next one, and the next, until the stage’s timeline matches your paper line. Keep the first version short. Two or three touchpoints per stage that you can explain beat a dozen you cannot.

  4. Repeat for the other stages, then test with a dummy lead

    Build the remaining stages the same way. Then create a test lead with your own cell number and email, move it through the pipeline by hand, and read what arrives. This is where you find the text that greets the customer with a raw placeholder instead of their name because it was typed wrong. AgencyZoom keeps a troubleshooting article and a placeholder reference in the same collection.

  5. Turn it on

    Automation does not run until it is switched on, and AgencyZoom documents that imported automation arrives off by default for the same reason. Build it dark, test it, then turn it on.

Clone, export and import: the part most agencies miss

Once a stage works, you do not have to build the next pipeline from zero. AgencyZoom supports cloning automation from one pipeline to another, and it supports exporting a stage’s automation as a file. In the stage, click Actions then Export and the stage’s automation downloads to your computer. To load one, select the target pipeline and stage, click Actions then Import, and pick the file. Source: How to Export and Import Automation.

Three things to know about import files, straight from that article:

  • Export is one stage at a time. A five-stage pipeline is five files.
  • Imported automation arrives switched off by default. You toggle it on after you have read it.
  • The file is the same format whether it came from your own agency, another agency or a consultant. AgencyZoom even ships a starter set in the help center for the default New, Contacted and Quoted stages.

That last point is the quiet one. The import file is the unit of exchange for AgencyZoom automation. Anyone who hands you automation, a peer agency, a consultant or a tool, is handing you these files, and you load them the same way at the same menu path. There is no special door.

Where this goes wrong

The failures are rarely in the software. They are in the three decisions above the software.

Stages that overlap. Two stages that both mean “we are waiting on the customer” will both fire follow-ups, and the customer gets two cadences at once. The customer does not see your stages. They see several texts in a week about different things, none of them relevant. The fix is fewer stages with sharper lines, not more automation.

Messages written for a brochure. A text that reads like a carrier mailer gets ignored. The stage line you wrote in Step 1 should produce a message a CSR would actually send by hand. If it would not, rewrite it before it runs a thousand times. There is a longer piece on this in Keeping It Personal: Authentic AI Communication.

Nobody owns the tasks. A call task fires to a producer who was never told the stage creates tasks. It sits. The timeline keeps going. The lead gets a text on day four referencing a call that never happened. Every task touchpoint needs a person who knows it is coming and a reason to clear it.

If you want a smaller starting set, The First Three Things to Automate in Your Agency picks the three workflows worth doing before anything else.

Doing it yourself versus having it written for you

Everything above is doable in an afternoon by an admin who knows the agency. The slow part is not the clicks. It is writing a timeline for every stage, in your voice, using your real pipeline names, lead sources and tags, and checking that each text fits in one message and each subject line is not cut off on a phone. That is the work a consultant used to charge weeks for, and it is now the part a tool can do.

That is what the Architect does. It reads your real AgencyZoom setup, pipelines, stages, lead sources, tags and team, asks about your agency, and builds the full package in about two minutes once the plan is set. Every message is checked: texts under 160 characters, subject lines 30 to 60, only names that exist in your account. It writes in English and Spanish in one package, and if you already have automation it can improve what you have from an export. It only reads your AgencyZoom. You import the files yourself at the menu path above, they arrive switched off like any other import, and AgencyZoom flags duplicates and lets you match or add a lead source or tag that does not exist yet. A few newer AgencyZoom settings cannot travel in an import file; when that happens it gives you the exact menu path to set them by hand.

The Architect is part of EffiZoom Pro, $39 a month or $374 a year with a 7-day trial, and the Free plan includes a few credits to try it. Either way, the setup lives in your AgencyZoom, at the same Lifecycle Automation tab, where you can read every line of it. Prefer we build it? Book a fit call.

FAQ

Questions about this topic

Do I need to be an admin to build automation in AgencyZoom?

Yes. AgencyZoom's help center states the user must have the Admin permission level to build automation under Lifecycle Automation.

Does imported automation turn on by itself?

No. AgencyZoom documents that imported automation arrives switched off. You review it in the stage, then toggle it on when you are ready.

Can I copy automation from one pipeline to another?

Yes. AgencyZoom supports cloning automation between pipelines, and exporting a stage's automation as an import file you can load into another stage or share.

Keep reading

AgencyZoom how-to and templates · Guide

AgencyZoom workflows for service requests and renewals

How to set up AgencyZoom service pipelines so every request has an owner, a stage and a confirmation, and where renewal workflows fit beside them.

· 5 min read

AgencyZoom how-to and templates · Guide

AgencyZoom automations for new leads, stage by stage

What AgencyZoom automation should do in New, Contacted and Quoted, and in Smart Cycle, with the settings that decide whether a new lead hears from you on time.

· 5 min read